02-01-2016, 05:59am
Pulling motors down and resembling them is usually pretty easy, all the technical bits like getting cam timing right with the base spacer has all been done before and plenty of info online! (Luckily for me). As for the power commander i originally was just buying a stage one kit and bolting it on as is. Both RCC and velocity say add a PC3 and tune! That's were my upgrades started, got a PCV with the boost input and went from there.
Yes i should probably have some thing better and looking at it now id like to run 8 injectors but were do ya stop$$?? Also I'm finding it hard enough to find a tuner as it is. If i started it all again if probably go a different path starting with the RCC stg2 kit but I'm here now.
Sent from my GT-I9507 using Tapatalk
Yes i should probably have some thing better and looking at it now id like to run 8 injectors but were do ya stop$$?? Also I'm finding it hard enough to find a tuner as it is. If i started it all again if probably go a different path starting with the RCC stg2 kit but I'm here now.
Sent from my GT-I9507 using Tapatalk