28-12-2005, 10:47pm
Scroll down and look at the "Suspension setup tips" by Rocket Rod. Lots of good info there...
Here's what worked for me:
This is what we did to my bike a few months back and the improvement was fantabulous. It's been done on 6 of the bikes here in Sydney so far, and all are well pleased...
Settings for a friendly ride. Front forks fully dropped in the stock clamps.
Front Preload 3 Rings Showing
Compression 3 Clicks out
Rebound 3 Clicks out
Rear Shock
Preload 9 - 10 threads showing from the top
Compression 4 Clicks out
Rebound 4 Clicks out <i></i>
Here's what worked for me:
This is what we did to my bike a few months back and the improvement was fantabulous. It's been done on 6 of the bikes here in Sydney so far, and all are well pleased...
Settings for a friendly ride. Front forks fully dropped in the stock clamps.
Front Preload 3 Rings Showing
Compression 3 Clicks out
Rebound 3 Clicks out
Rear Shock
Preload 9 - 10 threads showing from the top
Compression 4 Clicks out
Rebound 4 Clicks out <i></i>