fuel pump again

[Pommie]

I've just been through this with my K1.

You can get a new housing with inbuilt filter for about $260 from www.mrcycles.com (USA). From an Australian Suzuki dealer you're looking at $280 to $360.

Or you can follow the instruction on this link (which is what I did): http://www.hayabusa.org/forum/maintenanc...r-mod.html

Replacement socks are available on ebay. Or included with cheap pumps.

I elected to throw the pump in the bin and fit one from Hamilton Motorsports on ebay for about $80 delivered.

Get your injectors cleaned properly by someone with all of the right gear.

On the Gold Coast, you'll find Powerhouse Dynotuning. Steve and Blair know what they're doing and have all of the right gear in-house.

Having looked at the mod on the http://www.hayabusa.org/forum/maintenanc...r-mod.html I've noticed that the 'O' ring at the bottom of the outlet partially covers the actual outlet from the filter housing. Surely thats a crap idea too, and when drilling the new hole do you drill to the inside of the 'O' ring. The instructions would appear to have the new outlet hole directly under it. Is that where you put yours, I'm thinking of going a little further towards the centre.

Luckily I have an old spare that I've chopped up to see what goes on inside

I will be going to Blair to get the injectors cleaned as he's helped me out before. A top guy