Contact Us
18-01-2014, 12:55pm
(This post was last modified: 18-01-2014, 12:56pm by playswithnitro.)
I've just been through this with my K1.
You can get a new housing with inbuilt filter for about $260 from www.mrcycles.com (USA). From an Australian Suzuki dealer you're looking at $280 to $360.
Or you can follow the instruction on this link (which is what I did): http://www.hayabusa.org/forum/maintenanc...r-mod.html
Replacement socks are available on ebay. Or included with cheap pumps.
I elected to throw the pump in the bin and fit one from Hamilton Motorsports on ebay for about $80 delivered.
Get your injectors cleaned properly by someone with all of the right gear.
On the Gold Coast, you'll find Powerhouse Dynotuning. Steve and Blair know what they're doing and have all of the right gear in-house.
You can get a new housing with inbuilt filter for about $260 from www.mrcycles.com (USA). From an Australian Suzuki dealer you're looking at $280 to $360.
Or you can follow the instruction on this link (which is what I did): http://www.hayabusa.org/forum/maintenanc...r-mod.html
Replacement socks are available on ebay. Or included with cheap pumps.
I elected to throw the pump in the bin and fit one from Hamilton Motorsports on ebay for about $80 delivered.
Get your injectors cleaned properly by someone with all of the right gear.
On the Gold Coast, you'll find Powerhouse Dynotuning. Steve and Blair know what they're doing and have all of the right gear in-house.