power commander 5

[Batfink]

The PCV is now available for the 99-00 (Part number 20-042) and they can be bought for under US$300 delivered. There is NO ECUeditor option for this model unless you update the ignition system and ECU to a later model.

I went with the PCV as it was much cheaper than upgrading my 99's ignition system, as I have done with previous bikes, which was then unable to do what I needed it to so I had to buy another computer to control ignition. At the end of the day I had no choice but to use an aftermarket fuel/timing computer anyway.

The PCV has changed the game regarding ECUeditor vs Power Commander, where the PC3 lost out previously I think the ECUeditor loses out now where the mass market is concerned.

PCV features:

-100/+250% fuel adjustment
+/- 20% timing adjustment
Fuel/timing adjustable PER gear
Fuel/timing adjustable PER cylinder
Fuel/timing adjustments based on temp/boost inputs *NOT POSSIBLE WITH ECUeditor ON GEN1*
Dual map switchable
Adjustable rev limit
Built in launch limiter
Pit lane speed limiter

If you buy a PCV-PTi, it is supplied with a Bosch 3 Bar MAP sensor as part of the PCV harness for boost applications! No mucking around, plug and play with an easy interface and no more downloading Renesas, interface drivers, troubleshooting etc.

that sounds really interesting M.. I have yet to pull apart my 99 to see why PC3 isn;t working.. I guess that measn it's not plugged in either ??? all new to ignition adjustment systems....