Contact Us
thanks for the tips guys, Grunt given im stubborn and the like ill persist. I always liked the idea of being the one to do what i need to my own engine so i figured either way its a learning experience. could end up a costly one as you say.
Progress update. I have got the cover off and cams out. Head bolts are out but then DOH! theengine thrust mounts etc are still in at the top so i was tugging and swearing at the bike for nothing. now to find a special tool to get those things loosened or do i not need to loosen them and im missing something else?
In This one there is a small mark on the cam lobe. is this an issue? is it something i can hit with a very fine sand paper to smooth out or am i getting a new intake cam?
Progress update. I have got the cover off and cams out. Head bolts are out but then DOH! theengine thrust mounts etc are still in at the top so i was tugging and swearing at the bike for nothing. now to find a special tool to get those things loosened or do i not need to loosen them and im missing something else?
In This one there is a small mark on the cam lobe. is this an issue? is it something i can hit with a very fine sand paper to smooth out or am i getting a new intake cam?
Regards
Dan
Dan