Contact Us
19-07-2012, 11:14pm
It is possible that the OEM bolts will not be suitable. Can't vouch for rear but after changing my front rotors to aftermarket the OEM bolts were no good.
I found the oem shank was 3mm too short and the thread needed to be 5mm longer to go all the way through the carrier into the hub. I got titanium bolts
from Pro-Bolt and modified them to suit (could not got an exact match to measured specs.)
I found the oem shank was 3mm too short and the thread needed to be 5mm longer to go all the way through the carrier into the hub. I got titanium bolts
from Pro-Bolt and modified them to suit (could not got an exact match to measured specs.)