HELP! Lowering link settings.....

[Greeny_SA]

If Stock is 119 mm between hole centers & you want it 2 " lower (48mm ).
If you use the holes with 135 mm centers ( 16 mm longer than stock), at a ratio of 3-1 it should lower the rear by 48 mm 2" between friend's .

And you'd think that being an Estimator I would have worked that out, Greeny you're a trooper mate, thank you, I hadn't yet removed the stock link and therefore hadn't thought of the obvious option of measuring stock and working it out. Seems my brain gets left at work at the end of the day too huh. Thank you very much for your help. I emailed roaring toyz for general assistance too and their sales manager got straight back to me with PDF fitting instructions and photo reference. (the PDF doesn't give which hole is what height setting but I'm happy to put the sheet up for those who want to see it)
Thanks again Greeny :)

Glad to help . I Made a set to raise mine & once you've done it, it becomes easier to get the head around .Thanks to Blackzook's detailed instructions .Bazman, I'm a fitter & turner not a Mathematician .