Modding the New Pashnit Hayabusa

[pashnit]

LED Lighted Hump from CustomCowls.com

Came across Custom Cowls.com on eBay & asked Emmett, the owner, if he could do some custom work for me. Didn't want to mess up my original, and since we sell replacement humps, this ought to be a good fit to mod one of our off-the-shelf products & make it a one-off item.

Here's the spare hump I got:
--> Suzuki Hayabusa Rear Hump | CANDY INDY BLUE | SUZUKI: GSX 1300R HAYABUSA | 2008-2012 | # SOLOS306CIB

Side by side, the color I thought was near perfect, so shipped it off to CustomCowls.com & emailed a high-res graphic of the pashnit logo with the pointy A.

Here's what we're starting with...






Pics of it being mocked up with the Pashnit Tours logo




LED's installed on the inside that light up.

This is halfway done.




I opted to have the hump repainted once the cutting was done, my choice, so off it went from CustomCowls on down to FL to Race Ready Paint ( http://www.RaceReady.us ) which specializes in painting Busa's. They've also done my inner dash panels, mirrors, and even the brake carriers on my '00 back in the day.

They repainted it with the '08 blue & sent it back to CustomCowls.com who then installed the LED's on the inside.




All finished and ready to send back to me. Pleased as punch!

Very unique mod, nobody has anything like this.

Since the bike is only used for travel & leading tours, it's perfect!

---

In the meantime, I had wired up a special switch for this too with one of the 3-button PMR Components Bar Switch so I can turn it on or off.

---> Bar Switches for Motorcycles - PMR Components | Pashnit Moto




Admittedly, this was a lot of work to create the wire loom for all the new lighting mods, but fun stuff! A lot of shrink wrap & solder.

Now we can turn the hump on or off at the flip of a switch.




The PMR Bar Switch: Note there's one on the right side too for our Symtec Heated Grips.

If you drag race, that's where you'll install your PMR Kill Switch (we have those in stock too!)

---> Bar Switches for Motorcycles - PMR Components | Pashnit Moto

---> Kill Switches for Motorcycles - PMR Components | Pashnit Moto




Wiring in the hump - since it came with harness, so all you need to do is provide 12V power. There is a plug to the wire, so if you want to take the hump completely off, just unplug it.

A super easy power source is your 12V power supply for the rear license plate light.

The Butane torch is what makes using the shrink wrap so easy.




We'll also need to mod this hump for the RAM mounts attached to the grab rail bolts, which will be additional Camera Mounts.

---

All finished





...& back the road with another tour group.

Looks super-cool!!






Light glow during the day (& rain)

---