(22-01-2012, 01:35am)pashnit Wrote: Great idea Paul, I like it.
Thanks mate, should have made it about 30 chain jobs back. Anyone doing their own chains may be interested in the EK rivet master links for their 530 chain. It comes with 2 temporary spacer plates that are installed between the side plates. Simply press the side plate home, rivet the pins and remove the spacers. The spacers are shaped so as they don't interfere with the O-rings. Another job made even easier, Paul.
(22-01-2012, 08:18am)Pommie Wrote: electric rattle gun does the job for me
Yeh mate each to their own. I don't use rattle guns on output shafts, even with the box in neutral. Watched an apprentice rattle a nut off once and it picked up on the loctite. Fortunately it stripped the threads out of the nut and not the shaft. Torqueing it up with a rattle gun imo involves too much guess work. But hey whatever works, Paul.
Contact Us
