Contact Us
05-01-2012, 10:21pm
If its idling rough , and the valve clearance is right ,as you have has it apart, check your cam timing is correct
the map sensors have a large influence also, be sure the inlet air pressur sensor on the back of the airbox is connected to all 4 throttlebodies only, with no split hoses, and no left over flapper solenoids etc
and the atmospheric pressure sensor on the left side of the frame (where the flapper solenoid was mounted) has no hose attached,
the map sensors have a large influence also, be sure the inlet air pressur sensor on the back of the airbox is connected to all 4 throttlebodies only, with no split hoses, and no left over flapper solenoids etc
and the atmospheric pressure sensor on the left side of the frame (where the flapper solenoid was mounted) has no hose attached,