TRE....on a gen 2...do they work??

[BikerBoy]

Thanks so far 4 the response!!!
With all due respect I am not interested in re mapping or changing my original ECU settings, I simply want to take the restriction off this bike WITHOUT touching any other settings. I feel if the TRE doesnt do what I want I can always easily unplug it from the system and I am back to what i know....original and untouched...
Thanks and hope to hear from members that have used the TRE successfully??
cheers..

for what a TRE does, the same thing via flashing is pretty much just as simple as plug the pc in 'tick the boxes' and click save (flash). If you don't like it, plug the pc into the ecu again and re-tick the boxes and you are back to 100% stock settings again. You dont have to have a full remap or change anything else if you dont want to.

Also to get a TRE such as "Healtech's X-TRE" that retain the gear indicator functionality, you will need to CUT and SPLICE into the wiring on your ecu. More damaging than a flash will ever be!!. There is no going back to "original and untouched" once you've installed it. A plug 'n' play TRE will show the bike to be in a particular gear all time.

I've personaly installed and used a TRE on my previous bike and also personaly removed the restrictions on my Busa's ecu via ecueditor and would choose to flash the ecu 1000 times over before using any aftermarket TRE again.

Don't be concerned that flashing could screw your ecu or alter the way your bike runs to the point of never going back to stock settings again. It's not like that at all.