Contact Us
20-02-2007, 08:23pm
Those instructions a far too complex.
Just hit the metal with a rough wet and dry to remove the coating.
Then gradualy move up the grit content of the paper with a finer paper to remove the scratches that you might create.
After you have a smoothish finish, hit it with a superfine wet and dry.
Then use a good metal polish such as Purple or Autosol, to make it sparkle.
Give it another polish after any wet riding to keep the shine.
Rgds BUSGO
"TAKE MY ADVICE"
I'm not using it anyway!<i></i>
Just hit the metal with a rough wet and dry to remove the coating.
Then gradualy move up the grit content of the paper with a finer paper to remove the scratches that you might create.
After you have a smoothish finish, hit it with a superfine wet and dry.
Then use a good metal polish such as Purple or Autosol, to make it sparkle.
Give it another polish after any wet riding to keep the shine.
Rgds BUSGO
"TAKE MY ADVICE"
I'm not using it anyway!<i></i>