Clutch/Stand Switch

[Shifu]

Not sure why you would want to Max,
but if you unplug the ecu connector with the black/yellow wire on it ,
with a biro push the pin lock on the edge of the connector usually within the ecu, white single rectangle , it will only move a couple of mm
then pull the black/yellow wire out of the connector and tape to insulate the bared end
then push the pin lock back in place , 2 small rectangles on the opposite side
and fit the connector back in the ecu..
This is easily reversable so it could be put back to std at any time .

Just lazy mate, sick of pulling the clutch in every time I start her.

Just make sure she is not in gear when you do. Otherwise you could have some adreanaline filled moment. I thing that's the reson behind that feature.