31-07-2011, 05:16pm
(31-07-2011, 03:08pm)davecrowley Wrote: hey guys,just removed the right side fairing with no problems.the utube fella said to remove the push pins on the left side also but that is not needed,only 11 items removed on the rightside.1st I took the 2 out where the left and right side join underneath at the front and then the one inside fairing near the bottom of the radiator and the one inside fairing right up front just below right blinker.Then removed 2 just in front of the rear wheel underneath and then the last pushpin up top near the front brake lever and thats all the pushpins done,7 all up.Then the 2 alan keys near front brake lever and the one in middle of fairing and lastly the one near the rear brake lever,and thats the 11.The black section that runs alongside the tank has a gromet halfway along it,and this black section has to be lifted directly upwards(same as the gen1),and I find it easy if you raise the tank.And thats it guys,a few little jiggles and of it comes.Now to see if its that easy to put back.oops,forgot to mention,the first 2 pushpins you take out underneath that joins the 2 halfs together,pull that section apart towards the end of removing all the others and it will come apart easy.