Bike won't start without bump / push start ????
#2
Paul,
There is an engine cutout switch on the clutch lever assembly.
You may have damaged this as well when the bike fell.

Another thing -- If you have a 99 busa that has been over on its side, you have to drain the oil strainer pipe.
You will find it above your gear lever on the left side of the engine just behind the edge of the fairing. It is a rubber hose and has a plug in the end of it that you can pull off to drain the overflow from the gearbox and airbox.

Rgds BUSGO

"TAKE MY ADVICE"
I'm not using it anyway!<i>Edited by: BUSGO at: 24/1/07 7:39
</i>
Reply


Messages In This Thread
Bike won't start without bump / push start ???? - by tenacious - 24-01-2007, 01:28am
Re: Bike won't start without bump / push start ???? - by BUSGO - 24-01-2007, 06:36am
Re: Bike won't start without bump / push start ???? - by Turtle - 24-01-2007, 07:27am
Re: Bike won't start without bump / push start ???? - by kev11e - 24-01-2007, 07:57am
Re: Bike won't start without bump / push start ???? - by Heidi1 - 24-01-2007, 10:25am
Re: Bike won't start without bump / push start ???? - by Heidi1 - 24-01-2007, 10:54am
Re: Bike won't start without bump / push start ???? - by rev 01 - 24-01-2007, 12:23pm
Re: Bike won't start without bump / push start ???? - by Heidi1 - 24-01-2007, 02:57pm
Re: Bike won't start without bump / push start ???? - by tenacious - 25-01-2007, 03:51am
switch - by Maj750t - 25-01-2007, 07:35am
Re: Bike won't start without bump / push start ???? - by Busdriver - 25-01-2007, 01:53pm
Re: Bike won't start without bump / push start ???? - by rev 01 - 25-01-2007, 08:01pm
Re: Bike won't start without bump / push start ???? - by tenacious - 26-01-2007, 02:21am
limited......... - by rev 01 - 26-01-2007, 03:31pm



Users browsing this thread: 1 Guest(s)