Bluegauges Face plate

[piperjon]

You just made me check rod but there the same as genll but they have the 300 where the genll just has the two lines after the 280 but exactly the same lines as far as i can tell.

Hi ROD.

Yes they are for a GEN2 and calibrated so that the speedo is right on.
You can email the guy if you have any questions his name is Scott Woodruff .
Also there was a guy that showed you how to put them on step by step here. But if you go to the bluegauge forum and scroll down to Suzuki and click on that you will see what he has left and easy to work with. You just have to bend the face plate to get under the pointer and them line up the screw holes.
If you do get them I have just about all you need to add then on here.
If you want any info just PM me ok

---

Look great at night. Not so sure about the White faces during the day.

I have a smoky D/D screen and some times I cannot see where the pointers are so being white will help me.

---

Can you get them to change the rev limit shown as red line? My 1441 with cams revs much higher than stock before the limiter kicks in.

Hi,
You will have to contact Scott and ask him if that can be done.