08-11-2006, 06:37am
Not sure how or what you did to fit it Bear ............ but they are so simple to fit I don't even charge to do so ?? The water tank fits exactly where it originally did
The flex is in the "NOSE" of the sprocket cover as if you look you will note that the first 2 to 3 inches of the cover has no bolt support and hence allows it to flex. If you are still getting movement in the cover I would check to make sure that the cover is located and seated on it's dowels correctly !
As these brackets have been used for around seven years now both here and around the globe, I don't think there is much question on if they work or not.
Was it you that cut one in half trying to fit it Bear ? and I supplied another free of charge ? From memory I remember someone in the west having a prob fitting one ?
FF1 <i>Edited by: fasterfaster1 at: 8/11/06 7:41
</i>
The flex is in the "NOSE" of the sprocket cover as if you look you will note that the first 2 to 3 inches of the cover has no bolt support and hence allows it to flex. If you are still getting movement in the cover I would check to make sure that the cover is located and seated on it's dowels correctly !
As these brackets have been used for around seven years now both here and around the globe, I don't think there is much question on if they work or not.
Was it you that cut one in half trying to fit it Bear ? and I supplied another free of charge ? From memory I remember someone in the west having a prob fitting one ?
FF1 <i>Edited by: fasterfaster1 at: 8/11/06 7:41
</i>