Contact Us
05-11-2006, 05:40am
Have been making locally (CNC machined) and running these supports for the past six years.
Failure is caused by flex of sprocket cover as slave cylinder actuates. If you hold cover whilst operating clutch one can feel it flex. If not a must standard, certianly required if one fits heavy duty clutch springs as problem is magnified as spring pressure is increased.
85
FF1 <i>Edited by: fasterfaster1 at: 5/11/06 6:48
</i>
Failure is caused by flex of sprocket cover as slave cylinder actuates. If you hold cover whilst operating clutch one can feel it flex. If not a must standard, certianly required if one fits heavy duty clutch springs as problem is magnified as spring pressure is increased.
85
FF1 <i>Edited by: fasterfaster1 at: 5/11/06 6:48
</i>