03-03-2011, 08:39am
I just clocked up 78,000 on my K6 which I bought new in Jan 06.
The only issue:
when doing the valve clearances at 72,000 (all were still within limits) some very minor pitting was found on the cam lobes. These were polished out with no problems. I had a new cam chain fitted while the cams were out.
The only issue:
when doing the valve clearances at 72,000 (all were still within limits) some very minor pitting was found on the cam lobes. These were polished out with no problems. I had a new cam chain fitted while the cams were out.
Regards,
Busdriver (aka Les)
Busdriver (aka Les)