Throttle Position Sensor
#43
Ok all done, did another check this morning and all was still well balanced and yes I did as Geri mentioned thats the way Haynes manuel suggested too. Checked the voltage on TPS and remains good at 1.22 and 4.44 open, didnt adjust further as didnt wnt to reduce the 4.4 to reduce the 1.2 to the correct 1.1 (perhaps adjustment wuda made plus on one and minus on the other, I dunno perhaps shuda tried). Took bike out for a spin and shes a brute but then she always was, perhaps I noticed a 10% improvement perhaps my imagination but running well.

Gaza, carbtune reccomends vertical off the handlebar, I did vertical off the top of fuel tank when raised, hung it on tank support tip with given band.

The strange thing was I noted texta lines on each nipple (prob from when last done) on all 4 nipples.......that wasnt used by hoses from carbtune, so either I did all 4 wrong or they marked the ones not to use. baffles me. <i></i>
Reply


Messages In This Thread
Throttle Position Sensor - by Evero - 17-02-2006, 10:49am
Re: Throttle Position Sensor - by gazza414 - 17-02-2006, 07:44pm
Thanks - by Evero - 17-02-2006, 08:03pm
Re: Thanks - by simmo - 17-02-2006, 09:31pm
Re: Thanks - by rev 01 - 17-02-2006, 10:34pm
Re: Thanks - by rocket rod 7777 - 17-02-2006, 11:36pm
Re: Thanks - by gazza414 - 18-02-2006, 07:33am
Re: Thanks - by Maj750t - 18-02-2006, 08:23am
Re: Off the Haynes workshop Manual - by Volvi - 18-02-2006, 09:52am
TPS - by fasterfaster1 - 18-02-2006, 09:28pm
Re: Iron knob........ - by GDYUP - 18-02-2006, 09:31pm
TPS - by gazza414 - 20-02-2006, 09:19am
Re: TPS - by Geribusa - 21-02-2006, 07:11am
Mercury rising - by gazza414 - 22-02-2006, 09:04am
Re: Mercury rising - by Volvi - 16-03-2006, 04:52pm
Re: Mercury rising - by gazza414 - 17-03-2006, 04:55pm
Re: Mercury rising - by rev 01 - 18-03-2006, 01:58pm
Re: Mercury rising - by GDYUP - 19-03-2006, 09:05pm
From Belfast - by gazza414 - 20-03-2006, 09:18pm
Re: From Belfast - by Volvi - 20-03-2006, 10:13pm
Na - by gazza414 - 20-03-2006, 11:32pm
Re: Na - by Volvi - 21-03-2006, 07:02am
No probs Volvi - by gazza414 - 21-03-2006, 11:03am
Just noticed - by gazza414 - 21-03-2006, 11:07am
Re: Mercury rising - by Volvi - 31-07-2006, 02:47pm
Re: Mercury rising - by fasterfaster1 - 31-07-2006, 04:57pm
Re: Mercury rising - by Volvi - 31-07-2006, 07:21pm
Re: Mercury rising - by rocket rod 7777 - 01-08-2006, 09:00am
Re: Mercury rising - by Volvi - 01-08-2006, 10:55am
Exactly - by gazza414 - 01-08-2006, 12:53pm
Re: Exactly - by BEAR - 02-08-2006, 11:17am
Yip - by gazza414 - 02-08-2006, 11:46am
Re: Yip - by Geribusa - 03-08-2006, 07:36am
Re: Yip - by rocket rod 7777 - 03-08-2006, 08:56am
Re: Yip - by BEAR - 03-08-2006, 11:17am
Re: Yip - by Volvi - 03-08-2006, 03:51pm
Re: Yip - by Geribusa - 04-08-2006, 04:15am
Re: Yip - by gazza414 - 04-08-2006, 10:17am
Re: Yip - by BEAR - 04-08-2006, 10:41am
Re: Yip - by Volvi - 04-08-2006, 02:48pm
Re: Yip - by Volvi - 21-08-2006, 03:43pm
Re: Mercury rising - by spanner spinner - 31-08-2006, 08:40pm
Re: Mercury rising - by Volvi - 01-09-2006, 08:24am
Re: Mercury rising - by rev 01 - 01-09-2006, 06:09pm
Re: Mercury rising - by gazza414 - 01-09-2006, 06:52pm
Re: Mercury rising - by Volvi - 02-09-2006, 09:28am
Fuel lines - by BUSGO - 02-09-2006, 09:37am
gunked off - by rev 01 - 02-09-2006, 12:34pm
Set up - by fasterfaster1 - 04-09-2006, 09:43am
Re: Set up - by BEAR - 04-09-2006, 11:02am
Re: Set up - by Volvi - 04-09-2006, 07:32pm
Re: Set up - by Maj750t - 04-09-2006, 08:03pm



Users browsing this thread: 1 Guest(s)