Contact Us
01-12-2010, 07:20pm
Hi, I must be getting old or something is going wrong, i can't seam to be able to remove the faring from my 2010 Busa. (right hand side faring)
I have removed the 4 allen key bolts, the 5 black plastic push plugs (the ones that you either push the little center piece in or pull the center piece out) and the 3 plastic clips (the ones that are molded into the faring)
Hope this makes sense.
I can get the rear half of the faring to come away from the frame but the front half that is connected to the nose piece remains solid.
There is something i am missing here somewhere.
Can somone help me out here?
Even a step by step instructions would be appreciated.
Cheers.
I have removed the 4 allen key bolts, the 5 black plastic push plugs (the ones that you either push the little center piece in or pull the center piece out) and the 3 plastic clips (the ones that are molded into the faring)
Hope this makes sense.
I can get the rear half of the faring to come away from the frame but the front half that is connected to the nose piece remains solid.
There is something i am missing here somewhere.
Can somone help me out here?
Even a step by step instructions would be appreciated.
Cheers.