naked busa conversions - getting rid of the plastic

[Tony Nitrous]

I used an ABM top yolk kit off the shelf in the UK but there are others or
someone will knock one up.....
(they normaly come with pull-back risers to clear the fairing but I specified uprights)


I used Renthal "789 Streetfighter" bars. Not available in AU but less than $80 to the door
from the UK. Streetbike bars are around 700mm, dirtbike's around 800mm BUT many dirtbike
bars dont have enough straight to take the extra switch gear off a road bike.
789 Streetfighter bar's are inbetween at about 750mm.
I use B and E express for bar's.
http://www.bandcexpress.co.uk/


Electrics,never been my strong point.
Not rocket science but a few wires need to be extended to move stuff that was under the fairing.





Speed Triple style twin lights would be good.
Different from the usual same old aftermarket type stuff.

---

If you keep the standard clock's you'll need to remount them.
I used a German GSG part but you could make something similar.


There is a company / website called "Wild Hair Accessories" I've never used them,
they are in the US and only buy in from Europe (and are not cheap)
but sometimes look to get an idea of what's out there.
http://www.whaccessories.com/Suzuki%20GSX%20R.htm