Contact Us
15-04-2010, 10:41am
Jamie you are correct Pete tuned my bike. Since then I have reflashed a dozen times at home (even in the garage at work!) after down loading info from the datalogger. The fine tune has been adjusted by me based on info provided by the wideband/logger.
By the way the reflashing is the same as the powercommander both can be adjusted by the owner no difference apart from it costing a fraction of the powercommander cost.
I cannot see how reflashing could possibly scramble the ECU to the point where it had to be replaced.
What exactly had they done to it?
Did the ECU's really need to be replaced?
Jamie I re read your post and mate I'm calling absolute bullshit, your comments prove that you have no clue about reflashing and are just making up shit to protect your business.
I have contacted Petrik - the person who created the reflash software and he has confirmed that it is IMPOSSIBLE to damage a ECU with this software.
If you charged your customers for replacement ECU's then you have done them a disservice. If you still have those trashed ECU's let me know I'll buy them from you reflash them and sell em on.
The only way to damage an ECU is to short it out which would be easier to do with a powercommander with all its wiring - the Flash cables go into the standard ECU plugs so are virtually impossible to get wrong.
I will copy this thread to Petrik and ask him to comment here to state the truth - he can decide if your stupid potentially slanderous comments are worth persuing legally.
By the way the reflashing is the same as the powercommander both can be adjusted by the owner no difference apart from it costing a fraction of the powercommander cost.
I cannot see how reflashing could possibly scramble the ECU to the point where it had to be replaced.
What exactly had they done to it?
Did the ECU's really need to be replaced?
Jamie I re read your post and mate I'm calling absolute bullshit, your comments prove that you have no clue about reflashing and are just making up shit to protect your business.
I have contacted Petrik - the person who created the reflash software and he has confirmed that it is IMPOSSIBLE to damage a ECU with this software.
If you charged your customers for replacement ECU's then you have done them a disservice. If you still have those trashed ECU's let me know I'll buy them from you reflash them and sell em on.
The only way to damage an ECU is to short it out which would be easier to do with a powercommander with all its wiring - the Flash cables go into the standard ECU plugs so are virtually impossible to get wrong.
I will copy this thread to Petrik and ask him to comment here to state the truth - he can decide if your stupid potentially slanderous comments are worth persuing legally.