Contact Us
(13-02-2010, 01:03am)Madmax Wrote: Thanks for the input Van, we appreciate your timely entry into this discussion. You have proven yourself to be an up front and honest vendor here.
I have bought a black reservoir and return spring from you, so no, we have not abandoned you. Your kit is top quality and made by yourself.
I asked you to be a sponsor of our Tathra ride and you freely put up a rear brake reservoir so suite any Hayabusa. Thank you so much.
Steventh won your prize.
And thank you for bringing this to the AHC forum's attention. I'm sure the Moderators will take notice of your information.
Thanks again.
Regards.
Max
Thank you, another part of his story that does not make sense is, "this is only a hobby" That is ridiculous, he has appeared on a ton of Suzuki forums around the world in the last 6 months. Someone sends me a link everyday about him. That makes it full time, not a hobby.
I barely have time to manage people on 2 TL pages and 2 Busa pages and
I started with TL parts in late 2003.
Regards,
Van
(13-02-2010, 03:17am)Mercenary Wrote:(13-02-2010, 12:40am)Vandriver Wrote: I'm glad to see that you guys picked up on this guy scamming you on your own.
He is using pictures of my reservoir in Post#29( the gold cup with my rear brake spring and seat)
And yes more people are picking up on he claims to live in a different country on every page, using whatever will benefit him more.
And price? Since I sold here in the past, he just looks at my thread then undercuts me. What were they here $62, On another Busa page that his thread was just removed from, they were $55.
He was a customer of mine on the TL pages, but he asked so many stupid questions, that I banned him as a customer. Now he shows up all over the net in the last 6 months acting like an expert and running group buys.
He is not making any of these parts, it is a Singapore sweatshop operation that he just buys from, then ships to you.
You have to admit it is a good business plan, since people are tighter than two coats of paint, he goes goes from place to place, going lower and lower on the price, since his cost is so low in the Far East.
It's great that you guys totally abandoned my reservoirs and I still Supported your December ride. I had no idea it was over this clown.
Yup i too bought the spring for the rearset from Vandriver before too.But in Extreme hayabusa forum.Vandriver i did email you and you said before that it cant fit in my brembo rear brake pump.But he said it could as long as the outlet is the same.Cause i am using stock rear brake hose and the outlet is the same as a stock rear brake pump.I will take a close up picture and send it to you through pm.If it can be fixed will get it from you instead.Since you are defintely more reliable.Even though it may be abit more expensive,i dont want any unnecessary trouble or headaches.
Hey to all,
suzuka as in the pm,i will support you if i know who you are and see the end product.The pictures look nice.Since we both live and in Spore ask me out to discuss further details on the product mass ordering.I will not put my head and reputation on the chopping board whom i dont even know.The senior moderator Kush in SBF needs my assurance and the PMO will be a go.Do take note its not a commercial mass ordering,both are different.
If its good i will support you 100 percent.Not only in SBF in other Spore local biking forums too.I have asked the senior moderator to run a check on you.He told me that in the past,you maybe using a different nick and something went wrong.He will need to go back and do a check to be sure.FYI i want out of the group order.Although its only $50,its my hard earn money and it can last me 3 meals for 5 days.I am not a well off bloke here.If you are an honest and top notch guy,i promise you you will have my 100% support in Spore biking communities.To reach 20 is not hard at all.I just dont want to see others including myself to be cheated.I hate cheaters and liers.
Feel free to send pics, just saying "Brembo rear master" is too generic, they have been making them for decades and it is much different on a 900SS, than it is on an R1. The outlet and the brake line have nothing to do with it. It is the inlet where the cup plugs in, that is important. Do you have anything to make measurements with. Even if you are using the R1 style, I doubt Brembo/Yamaha used the same size nipple and placed the bolt that holds the cup at the same distance from the nipple.
(13-02-2010, 01:10am)Greeny_SA Wrote:(13-02-2010, 12:40am)Vandriver Wrote: I'm glad to see that you guys picked up on this guy scamming you on your own.
He is using pictures of my reservoir in Post#29( the gold cup with my rear brake spring and seat)
And yes more people are picking up on he claims to live in a different country on every page, using whatever will benefit him more.
And price? Since I sold here in the past, he just looks at my thread then undercuts me. What were they here $62, On another Busa page that his thread was just removed from, they were $55.
He was a customer of mine on the TL pages, but he asked so many stupid questions, that I banned him as a customer. Now he shows up all over the net in the last 6 months acting like an expert and running group buys.
He is not making any of these parts, it is a Singapore sweatshop operation that he just buys from, then ships to you.
You have to admit it is a good business plan, since people are tighter than two coats of paint, he goes goes from place to place, going lower and lower on the price, since his cost is so low in the Far East.
It's great that you guys totally abandoned my reservoirs and I still Supported your December ride. I had no idea it was over this clown.
Howdy Vandriver, I bought one of yours 12 mths ago, Fantastic mate,Have you stopped doing them, I was suspicious when this first came up as they looked like yours & even the pics did too, I did bring you up early in this post, page 1 when busa bazz pulled out , but you can't help some people, this bloke was good, though a few saw through him ,you must be very good at your job Max.If your still making them Vandriver I reckon I know a few bloke's who want one .
Thanks, yes I am still making reservoirs. I only have the gold or black angled reservoirs in stock at the moment. I do have the material to make the straight reservoirs in stock. I have a lot of TL parts to start making in the next couple of weeks and that will include straight reservoirs. I do have an invoice for the material, I can take pics of it with me and a current issue magazine, so it is time stamped and I can take video of them being cut, like I have in the past. Can anyone else do the same?