Custom Gixxer K8 Busa! progress pics..

[Greeny_SA]

Hi all

Here's some pics of my K8 busa. Im part the way thru customising the bike. Not everyones cup-of-tea but im pretty eager to see it finished. Hold off judgement till im finished!

So far i've nearly finished making/fitting the gixxer tail. Have to extend the wiring harness and get a seat made and weld up some exhaust hangers.
Ive fitted a K5 or K6 gixxer front guard. And now sourcing a hugger.
As soon as the wiring and custom seat is done im pulling the fairings, guard, hugger and tank off to be sprayed, along with the rims and a few other small items. Im not too sure on the colour but i want to copy the coloured gen2 scheme mixed in with the coloured gixxer scheme. Hopefully it will tie in well.
Also fitting a 3+ rear sprocket if i can find a speedo healer or similar.

Here are the pics!

btw. before you say its too high i tried to match the angle of the tank stickers and pipes. somewhere in between! Ide rather it a slight bit lower but it sits similar to gixxers with the tip of the tail roughly 1inch higher than the tank.

Cheers

Unit, Speedo healer from Pashnit USA $115 USD Free delivery.