HELP FAST

[Greeny_SA]

Hopefully as Tassy member may be able to recommend a shop, but otherwise take your lever around to all makes and see if something fits, even some dirtbikes have hydraulic clutches , you may just need to bridge the clutch switch wires to start it
Lots of guys go to Tassy to ride and levers would be a common problem, i'm sure something will be available easily

just let me know an address to send if you need mine

Pete if it wasn't me that was online at the time someone else would have made a similar offer

Thanks Maj it is the actual gear changer not the clutch leaver

Most Hobart Shops are in the Moonah erea so will head in there first thing Tuesday

---

Drill a hole in it & stick a bolt in with 2 nut's. leave the bolt head sticking out enough to get your toe onto it .