08-12-2009, 11:24pm
Thanks very much for your kind thoughts Crane. I'm sure you'll be driving a Jay Ray McDermott big rig soon. If it wasn't for people like us. All these do gooders, brain tumored pigs & tree hugging greenies would be riding to work on pushbikes.
Apart from that, I've now decided to go with a worldwide consensous of opinion, use aftermarket rods, probabley Falicon H Beams that are 4grams lighter than the knife rod and cheaper. I'll end up buying em through good ol Schnitz Racing.
However, before I rip those stock rods off, I'll bung the Ross Pistons on & check the deck height clearance for CR calculation & check main bearing clearances.
Cheers
Thanks for helping spend another US$800 or so guys.
Cams: More money--probabley go the 415/395 hard weld jobs
Apart from that, I've now decided to go with a worldwide consensous of opinion, use aftermarket rods, probabley Falicon H Beams that are 4grams lighter than the knife rod and cheaper. I'll end up buying em through good ol Schnitz Racing.
However, before I rip those stock rods off, I'll bung the Ross Pistons on & check the deck height clearance for CR calculation & check main bearing clearances.
Cheers
Thanks for helping spend another US$800 or so guys.
Cams: More money--probabley go the 415/395 hard weld jobs