vmax vs hayabusa

[Toecutter]

Toecutter,

got any before and after dyno charts for your Max? I'm interested to see where the peaks now sit.

Camel

Hi Camel,

I don't have the sheets for my max, as the figure quoted is a relative esitmate based on the output of an identical bike in the US. The fellow that owns the other bike guided me through the set-up process is also the same guy who designed the velocity stacks, electronic eliminator mods and PCV maps.
Mine has the same specs and runs smoothly with his map without any leaning issues so I can't see the point in paying to put it on the dyno at this stage. The auto tune takes care of any small adjustments due to elevation etc.

Please see below for a progressive dyno chart from Olivers bike in the US. You will note that the bottom measurement relates to a standard Vmax with an output of 176.82hp and 113.76ft-lbs and the top figure relates to the final stage of mods with 206.61hp and 131.28ft-lbs = 177.79nm. These are corrected figures.

Hope this answers your question.