Contact Us
02-08-2005, 05:13pm
Sure!, you have a negative and positve that you connect to a switched output (generally the one above the indicator on the right side)
then you connect a wire to the tacho output
and if I remember correctly, you set the Raptor as a 4cyl and if you want the light to come on at 10600rpm you set the adjusters at 5300rpm because of the way signal that drives the tach runs
Then when you ride at full throttle and the light comes on change gear! ...... takes the guess work out of it
Brian
<i></i>
then you connect a wire to the tacho output
and if I remember correctly, you set the Raptor as a 4cyl and if you want the light to come on at 10600rpm you set the adjusters at 5300rpm because of the way signal that drives the tach runs
Then when you ride at full throttle and the light comes on change gear! ...... takes the guess work out of it
Brian
<i></i>