31-08-2009, 05:11am
OK time for a little more catch up. Things have rocking along and the Texas Mile is getting closer so here we go.
Our good friend Terry F is taking his Hayabusa to the Texas Mile this year so SRAD has been helping him prep it.
![[Image: P1019407.jpg]](http://i4.photobucket.com/albums/y109/ns50r/200MPH/P1019407.jpg)
Last weekend the installed the Boost by Smith DeRistrictor which is supposed to do the same thing as the T.R.E. but better. Improved Idle and lower gear mapping(similar to a Gear Position Sensor Mod) the only thing that changes is the 6th gear map, which the ECU thinks is still in 5th thus defeating the speed limiter. This is a plug and play installation just unplug the GPS and insert it between the plugs. Terry had already bought some exhaust I think it's the Hotbodies, so the next step was safety wiring. According to SRAD this is a secret arcane art.
Most of the bolts can be drilled on the bike so the job isn't too bad. We left Terry Guido and SRAD in the shop to do it. After a few hours of drilling, cool drink breaks oh and about a dozen drill bits the bike was done. Me and the Girls were having a ladies day in the Kitchen cooking Lasagna for the guys and just doing all of the things girls do when the guys are not around.(NO! Were were NOT having Pillow fights in our underwear! Why do all guys think that!?).
I came out to give Terry the quick rundown on safety wiring.
![[Image: P1019411.jpg]](http://i4.photobucket.com/albums/y109/ns50r/200MPH/P1019411.jpg)
Well Terry was amazed at the Safety Wire Pliers! Both of our sets are old school airplane twisters SRAD says are very old all I know is that they work very well, and he guards them like a treasure. So a few quick pointers and Terry was on his way to twisting wire.
![[Image: P1019413.jpg]](http://i4.photobucket.com/albums/y109/ns50r/200MPH/P1019413.jpg)
Things went pretty quick from there with a break for dinner than Terry wanted to get some pics of his bike and asked us girls to help.
Misty and Tammy helped him get it on the stand. Funny thing why is it you Guys always seem to do this all by your self until there's girls around?
So Misty and Tammy gave Terry a little hand.
![[Image: P1019404.jpg]](http://i4.photobucket.com/albums/y109/ns50r/200MPH/P1019404.jpg)
Which strangely enough turned into "Hey How about you girls take a pic with my Bike?" We should have known better!
![[Image: P1019401.jpg]](http://i4.photobucket.com/albums/y109/ns50r/200MPH/P1019401.jpg)
![[Image: P1019401.jpg]](http://i4.photobucket.com/albums/y109/ns50r/200MPH/P1019401.jpg)
Hahaha little did he know what was next!
YOU wanted something, help with your bike and some "Girly Pics" Now it's OUR turn! Polish the HeavyBus!
![[Image: P1019420.jpg]](http://i4.photobucket.com/albums/y109/ns50r/200MPH/P1019420.jpg)
AND polish the Nail Polish!
![[Image: P1019422.jpg]](http://i4.photobucket.com/albums/y109/ns50r/200MPH/P1019422.jpg)
As you can see SRAD and Guido were smart enough to steer clear of the Estrogen zone, they basically threw Terry under the Bus! Or maybe they threw him under the HeavyBus!hahahahaha
Our good friend Terry F is taking his Hayabusa to the Texas Mile this year so SRAD has been helping him prep it.
![[Image: P1019407.jpg]](http://i4.photobucket.com/albums/y109/ns50r/200MPH/P1019407.jpg)
Last weekend the installed the Boost by Smith DeRistrictor which is supposed to do the same thing as the T.R.E. but better. Improved Idle and lower gear mapping(similar to a Gear Position Sensor Mod) the only thing that changes is the 6th gear map, which the ECU thinks is still in 5th thus defeating the speed limiter. This is a plug and play installation just unplug the GPS and insert it between the plugs. Terry had already bought some exhaust I think it's the Hotbodies, so the next step was safety wiring. According to SRAD this is a secret arcane art.
Most of the bolts can be drilled on the bike so the job isn't too bad. We left Terry Guido and SRAD in the shop to do it. After a few hours of drilling, cool drink breaks oh and about a dozen drill bits the bike was done. Me and the Girls were having a ladies day in the Kitchen cooking Lasagna for the guys and just doing all of the things girls do when the guys are not around.(NO! Were were NOT having Pillow fights in our underwear! Why do all guys think that!?).
I came out to give Terry the quick rundown on safety wiring.
![[Image: P1019411.jpg]](http://i4.photobucket.com/albums/y109/ns50r/200MPH/P1019411.jpg)
Well Terry was amazed at the Safety Wire Pliers! Both of our sets are old school airplane twisters SRAD says are very old all I know is that they work very well, and he guards them like a treasure. So a few quick pointers and Terry was on his way to twisting wire.
![[Image: P1019413.jpg]](http://i4.photobucket.com/albums/y109/ns50r/200MPH/P1019413.jpg)
Things went pretty quick from there with a break for dinner than Terry wanted to get some pics of his bike and asked us girls to help.
Misty and Tammy helped him get it on the stand. Funny thing why is it you Guys always seem to do this all by your self until there's girls around?
So Misty and Tammy gave Terry a little hand.
![[Image: P1019404.jpg]](http://i4.photobucket.com/albums/y109/ns50r/200MPH/P1019404.jpg)
Which strangely enough turned into "Hey How about you girls take a pic with my Bike?" We should have known better!
![[Image: P1019401.jpg]](http://i4.photobucket.com/albums/y109/ns50r/200MPH/P1019401.jpg)
![[Image: P1019401.jpg]](http://i4.photobucket.com/albums/y109/ns50r/200MPH/P1019401.jpg)
Hahaha little did he know what was next!
YOU wanted something, help with your bike and some "Girly Pics" Now it's OUR turn! Polish the HeavyBus!
![[Image: P1019420.jpg]](http://i4.photobucket.com/albums/y109/ns50r/200MPH/P1019420.jpg)
AND polish the Nail Polish!
![[Image: P1019422.jpg]](http://i4.photobucket.com/albums/y109/ns50r/200MPH/P1019422.jpg)
As you can see SRAD and Guido were smart enough to steer clear of the Estrogen zone, they basically threw Terry under the Bus! Or maybe they threw him under the HeavyBus!hahahahaha