Contact Us
13-06-2005, 09:55pm
Hi again nick,
I'll do a quick run through them from memory starting from the fuel tank through to the injectors. It might pay to get a workshop manual to help you with where they are and if you then think you're up to doing it yourself. It's a bit daunting at first but you can do it yourself if your a bit handy. Could prove expensive to get a shop to do the work because of the time it takes to do the job. A lot of dicking about getting at things.
There is one in the fuel tank(replaceable) 3 in the fuel pump (2 mesh ones to clean and one paper replaceable) and one on the end of each injector(mesh not sure if they're replaceable). The ones I have trouble with are the ones in the fuel pump. They need a good clean about once a year.
You can find sites on the net that can help with the job, I think I used one called Fast Sjonny's Website, can't remember the address.
Hope this helps.
Turtle <i></i>
I'll do a quick run through them from memory starting from the fuel tank through to the injectors. It might pay to get a workshop manual to help you with where they are and if you then think you're up to doing it yourself. It's a bit daunting at first but you can do it yourself if your a bit handy. Could prove expensive to get a shop to do the work because of the time it takes to do the job. A lot of dicking about getting at things.
There is one in the fuel tank(replaceable) 3 in the fuel pump (2 mesh ones to clean and one paper replaceable) and one on the end of each injector(mesh not sure if they're replaceable). The ones I have trouble with are the ones in the fuel pump. They need a good clean about once a year.
You can find sites on the net that can help with the job, I think I used one called Fast Sjonny's Website, can't remember the address.
Hope this helps.
Turtle <i></i>