Contact Us
22-04-2009, 07:21pm
Easiest job in the world.
Just leave the bike in the warm sun for an hour or so and they just peel off.
Carefully lift one corner or edge and they pull away if warm enough.
It is important to warm the whole bike and not just use a heat gun on the sticker although that system will work eventually.
By warming the whole area the glue just softens and comes away, usually still attached to the back of the sticker.
If there is any residue, just use a little Goo Remover and a soft cloth.
Just leave the bike in the warm sun for an hour or so and they just peel off.
Carefully lift one corner or edge and they pull away if warm enough.
It is important to warm the whole bike and not just use a heat gun on the sticker although that system will work eventually.
By warming the whole area the glue just softens and comes away, usually still attached to the back of the sticker.
If there is any residue, just use a little Goo Remover and a soft cloth.
"If time catches up with you. You're going too slow!"
Regards BUSGO
Regards BUSGO