Contact Us
13-03-2009, 01:30pm
Use a good quality ring spanner. It's all I've ever used on any of my bikes. On a bike with a swingarm the size of the Busa's you'll be fine. On small bikes with a very light swingarm I tend to be a little careful not to go overboard but still, I've never chewed out bearings or had a nut come off.
I've only adjusted the chain twice on my Gen 1 in in 19,000km but the chain was new then & it is a DID.
I agree with Bugso, don't be shy with a top quality wax or oil as soon as it starts to look anywhere near shiny in the center or alternatively, at the end of any full daze ride.
I've only adjusted the chain twice on my Gen 1 in in 19,000km but the chain was new then & it is a DID.
I agree with Bugso, don't be shy with a top quality wax or oil as soon as it starts to look anywhere near shiny in the center or alternatively, at the end of any full daze ride.