cost about $35 from super cheap auto. if you wanna do that or something similiar you will need:
1, black spray can that will adhere to plastic(any colour you want really)
2, clear coat spray can
3, roll of thin detail tape or pin striping what ever its f*&^ing called.
4, a large cardboard box(you will understand later)
5, some 2000 grit wet/dry to surface the existing indicators
all i did was put a few lines of the tape down then lightly sanded over the top of it all the so remaining clear bits stays unsanded. then washed the lot with sugar soap sorta thing. then a number of very light coats of black allowing each coat to slightly dry then add another untill the whole lot is covered. remove tape and stick them in the card board box close it up and put it in the sun for a few hours to allow it to dry. then as many coats of clear as you want and back into the box in the sun. the box by the way keeps dust/shit off the paint while its drying and also keeps it all nice and warm. you could do any patern you want just be carefull to make sure you allow enough light to come out as this way what ever is painted black doesnt light up at all unlike tint. the way i have mine passed rego inspection so must be ok. not everyones cup of tea but like i said can do any pattern you want thats why i liked this way as you can be very individual
1, black spray can that will adhere to plastic(any colour you want really)
2, clear coat spray can
3, roll of thin detail tape or pin striping what ever its f*&^ing called.
4, a large cardboard box(you will understand later)
5, some 2000 grit wet/dry to surface the existing indicators
all i did was put a few lines of the tape down then lightly sanded over the top of it all the so remaining clear bits stays unsanded. then washed the lot with sugar soap sorta thing. then a number of very light coats of black allowing each coat to slightly dry then add another untill the whole lot is covered. remove tape and stick them in the card board box close it up and put it in the sun for a few hours to allow it to dry. then as many coats of clear as you want and back into the box in the sun. the box by the way keeps dust/shit off the paint while its drying and also keeps it all nice and warm. you could do any patern you want just be carefull to make sure you allow enough light to come out as this way what ever is painted black doesnt light up at all unlike tint. the way i have mine passed rego inspection so must be ok. not everyones cup of tea but like i said can do any pattern you want thats why i liked this way as you can be very individual
Regards
Dan
Dan