Ventureshield Protective Films

[horndog]

Can I ask, Do you have any photos of Gen I busa's a couple of years old with the venturafilm and a comparo regarding a long term test on the product.
Is there a grit build up over time that develops around the film?
How long will the product last before replacement is required?
Can the product be removed safely after a few years without damage to the paint job to re-apply a new film?
Sorry to be a saw thumb but just asking the questions?

All good questions. I dont have any long term photos on a Busa.
I can tell you that the film has a 6 year waranty against yellowing, cracking or bubbling provided it is fitted to manufacturers recomendations.
You would wash the bike as normal and any build up around the film edges should be cleaned up with a cotton bud and some rubbing alcohol.
No abbrasive polishes should be used on it.

The adhesive is designed to stay with the film if it is ever removed from the bike so none will be left on the paint and the paint will not be damaged.

Installation instructions attached if you are interested.

  Motorcycle Installation Instructions.zip (Size: 17.47 KB / Downloads: 5)