11-01-2007, 01:31pm
Forks : You need a front stand or jack to get the front wheel off the ground.
For good access, remove L & R fairings & nose cone.
Jack up front end & remove wheel, mudguard & brake calipers.
Don't disconnect the brake lines, just wire the calipers back out of the way.
Undo the pinch bolts at the top & bottom triple clamps & slide the fork staunchions out.
Later axles need a hex head tool not supplied in tool kit.
<i></i>
For good access, remove L & R fairings & nose cone.
Jack up front end & remove wheel, mudguard & brake calipers.
Don't disconnect the brake lines, just wire the calipers back out of the way.
Undo the pinch bolts at the top & bottom triple clamps & slide the fork staunchions out.
Later axles need a hex head tool not supplied in tool kit.
<i></i>