17-08-2008, 07:30pm
Well this is the one I have ordered there is only one way to find out
Ivan's Performance Products SMART Timing Retarder Eliminator and Speed Limiter Overide! The TRE is a device which allows much better throttle response in the first 4 gears. The "Smart TRE" has a built-in computer chip, is slightly larger than the orignial TRE, and requires no adjustments to idle speed or fuel mixture to maintain smooth idle quality!
2008 Hayabusa
What the manufacturer has done is to make a SEPARATE IGNITION MAP FOR EACH GEAR. This has been done for either safety and/or emissions reasons. However, it limits the power and smoothness of your bike in the first 1/2 turn of the throttle in gears 1 through 4.
The smart TRE will disable the speed limiter on the bike. This is due to the fact that the ECM does not see the 6th gear ignition map, which has an earlier rev-limiter.
The TRE is a direct "plug in" installation to your bike - no cutting or splicing The TRE has no effect at full throttle The TRE does have an effect at throttle openings up to 1/2 in gears 1 through 4 at ANY rpm. The TRE does NOT affect full throttle power. This has been verified on the dyno as well as on the road under controlled conditions. The TRE has also been tested by Sport Rider Magazine, with rave reviews. The TRE is for "race use only". The TRE does not comply with your warranty. The TRE does not comply with federal emission and/or safety laws.
They were clever in the design of this timing retarder. It still allows full timing at full throttle. As you shift up through the gears, the amount of throttle needed to access the advance curve decreases, until you make it into 5th gear and then it's gone. You have nice, smooth operation. Wouldn't you like your bike to respond just as smoothly in the lower gears? Installs in Minutes!
Comes with easy to follow instructions!!! With the TRE installed, the factory gear indicator will show 5th gear when the bike is in gear!
Ivan's Performance Products SMART Timing Retarder Eliminator and Speed Limiter Overide! The TRE is a device which allows much better throttle response in the first 4 gears. The "Smart TRE" has a built-in computer chip, is slightly larger than the orignial TRE, and requires no adjustments to idle speed or fuel mixture to maintain smooth idle quality!
2008 Hayabusa
What the manufacturer has done is to make a SEPARATE IGNITION MAP FOR EACH GEAR. This has been done for either safety and/or emissions reasons. However, it limits the power and smoothness of your bike in the first 1/2 turn of the throttle in gears 1 through 4.
The smart TRE will disable the speed limiter on the bike. This is due to the fact that the ECM does not see the 6th gear ignition map, which has an earlier rev-limiter.
The TRE is a direct "plug in" installation to your bike - no cutting or splicing The TRE has no effect at full throttle The TRE does have an effect at throttle openings up to 1/2 in gears 1 through 4 at ANY rpm. The TRE does NOT affect full throttle power. This has been verified on the dyno as well as on the road under controlled conditions. The TRE has also been tested by Sport Rider Magazine, with rave reviews. The TRE is for "race use only". The TRE does not comply with your warranty. The TRE does not comply with federal emission and/or safety laws.
They were clever in the design of this timing retarder. It still allows full timing at full throttle. As you shift up through the gears, the amount of throttle needed to access the advance curve decreases, until you make it into 5th gear and then it's gone. You have nice, smooth operation. Wouldn't you like your bike to respond just as smoothly in the lower gears? Installs in Minutes!
Comes with easy to follow instructions!!! With the TRE installed, the factory gear indicator will show 5th gear when the bike is in gear!