Cruise control GEN I bikes

[bandit]

got a pic Shane

Ok here ya go
This is done with throttle bodies on bike pics are just for show.
No need to remove any cables etc just lift the tank
Use a pair of pointy nosed pliers & just squeeze it together job done.
You could undo the screw but it wont achive the same result.

Warnings 1 watch the position of lever on cold start up now as the rpm will rise higher than normal so adjust the positionm to suit.
2 dont forget you have it on when you try to stop

Before shot shows flap & its travel



Now the modded flap & its furture travel

did this today ...it cruises at about 100 kph just needs a tweek