Contact Us
05-03-2008, 03:08pm
Mine has been spliced into the ECU connector..no notching required..that is for other work which has been written up on the org site.
In future ,the software will come as a plug and play straight onto the ECU harness.
On the trip down to PI..my Busa is cruising at 140km/hr at 10% Throttle position..it provides a very good case for part throttle tuning . In the future the software will have functionality over MAP mapping in this lower range.
In future ,the software will come as a plug and play straight onto the ECU harness.
On the trip down to PI..my Busa is cruising at 140km/hr at 10% Throttle position..it provides a very good case for part throttle tuning . In the future the software will have functionality over MAP mapping in this lower range.