Contact Us
The panniers locate on three points .
1 is a bracket sharing the rear footpeg/exhaust bolt,which is small and i leave on.
2 is a bracket that mounts to tail ( if you look under you will see two holes already there,and that stays)
3 is a bolt that replaces the front bungy bolt, which i do remove when not using.
So it takes roughly 15 minutes to put on take off, but the first few times is a bugger to get lined up.. also i have a 4-1 exhaust that requires spaceing to accomadate the panniers as the are moulded to go around the stock twins
1 is a bracket sharing the rear footpeg/exhaust bolt,which is small and i leave on.
2 is a bracket that mounts to tail ( if you look under you will see two holes already there,and that stays)
3 is a bolt that replaces the front bungy bolt, which i do remove when not using.
So it takes roughly 15 minutes to put on take off, but the first few times is a bugger to get lined up.. also i have a 4-1 exhaust that requires spaceing to accomadate the panniers as the are moulded to go around the stock twins
![[Image: photo3.jpg]](http://s88.photobucket.com/user/loafie01/media/photo3.jpg.html)