Contact Us
08-12-2013, 09:03am
Heezuz, if your still having problems in a couple of weeks your welcome to bring it up here just north of Shepparton and we can check it out
can go through and check all the fuel stuff , make sure its holding pressure and has enough volume, test the electronics and chuck it on the dyno if needed
For the turbo bikes i use a 400 psi hydraulic hose , some turbo fuel systems push fuel pressure above 100psi , it needs to be much better than your average injection hose , and there always a pain to get to fit that you can lift the tank and close without kinking
can go through and check all the fuel stuff , make sure its holding pressure and has enough volume, test the electronics and chuck it on the dyno if needed
For the turbo bikes i use a 400 psi hydraulic hose , some turbo fuel systems push fuel pressure above 100psi , it needs to be much better than your average injection hose , and there always a pain to get to fit that you can lift the tank and close without kinking