2002 clutch gone the way of the t rex

[revhead]

ok bothams my clutch has said good night ,

1,anyone recommend brands ,keep in mind i dont race it only flog it on a daily basis!

2, carbin fibre for friction plates?
3, motor is pete zawaks old donk has 36000k only,

the only thing i have noticed ,it isnt slipping ,it just has no pick up or lever feel at the bars anymore ,

im running a cbr1000,radial master cylinder and stock fluid line

all info welcome cheers

[yella]

If its not slipping why do you think its the fibres? pull it and check the stack, should take about 20mins to know whats going on. Most will say stick with stock Suzuki but I just fitted a set of Ballistic racing fibres same as in my turbo bike will let you know how they go

[revhead]

i suppose just being a lazy bugger ,i dont need the bike till next year ,

[Camel]

Open the oil filler cap. The smell of burnt/slipping plates is unmistakeable.

[revhead]

it isnt slipping ,i was leaning towards the slave cylinder or the clutch springs

[Camel]

Its not slipping but it has no pick up? I don't understand! Does the clutch work normally otherwise? Or are you saying the clutch won't disengage?
As far as clutch plates go, standard suzuki is the way to go.

[mozzie26]

Pull the slave cylinder off and check that the push rod is not jammed up with chain lube and crap.

[revhead]

good call Mozzie il give that a go.

Its not slipping but it has no pick up? I don't understand! Does the clutch work normally otherwise? Or are you saying the clutch won't disengage?
As far as clutch plates go, standard suzuki is the way to go.

i started the bus today, it worked as i rode it around the block ,but never had much feel at the bars,il pull it apart tomorrow

[Camel]

i started the bus today, it worked as i rode it around the block ,but never had much feel at the bars,il pull it apart tomorrow

Okay, sounds like the slave cylinder gunked pushrod problem.