Leevaz
#1
brake and clutch leavers comming soon. Imported by ERI.
Should be $150 a set long or short.
[img][Image: Leevers.jpg][/img]
Reply
#2
Only those colours?
/
Reply
#3
They look the goods Kawasuki.....what breed are they?
Reply
#4
They come in blk Blue ,red gold and silver
They are called Leevaz, thye are billet alloy.
Thye have not the Gen 2 as yet.
Reply
#5
(07-01-2010, 09:41pm)kawasuki Wrote: They come in blk Blue ,red gold and silver
They are called Leevaz, thye are billet alloy.
Thye have not the Gen 2 as yet.

Are they doing them for Brembo mastercylinders?
Good weather, good woman, good road, good bike, good-bye!!
Reply
#6
excuse my ignorance, but what is the difference from along to short set? (excluding the obvious length difference Lol3 )
Regards
Grant
(Townsville, QLD)

www.stickersuperstore.com.au (for your sticker and sign needs)

Smitten 03 with a hair dryer - slammed and stretched (stealth mode engaged)
Reply
#7
(08-01-2010, 11:41am)Macbusa Wrote: excuse my ignorance, but what is the difference from along to short set? (excluding the obvious length difference Lol3 )

The feel .
(08-01-2010, 10:40am)Madmax Wrote:
(07-01-2010, 09:41pm)kawasuki Wrote: They come in blk Blue ,red gold and silver
They are called Leevaz, thye are billet alloy.
Thye have not the Gen 2 as yet.

Are they doing them for Brembo mastercylinders?

checking
(07-01-2010, 07:41pm)CJ03 Wrote: They look the goods Kawasuki.....what breed are they?

Leevaz is the product name imported by ERI.
Reply
#8
whats the est time of arrival?
Regards
Grant
(Townsville, QLD)

www.stickersuperstore.com.au (for your sticker and sign needs)

Smitten 03 with a hair dryer - slammed and stretched (stealth mode engaged)
Reply
#9
They are obviously a Pazzo rip off.
Reply
#10
(08-01-2010, 11:26pm)drworm Wrote: They are obviously a Pazzo rip off.

U mean they look similar?
Reply
#11
Hey Ray

Would a long red set fit my GSX650F?
Kathy
Rear half of 2000 Red/Grey Busa Smitten
Rear half of 2010 Red BMW K1300 GT Smitten
Reply
#12
Ray, you might have missed my question about estimated time of arrival, due to a unintellectual, nil value 'Pazzo rip off' post.
Regards
Grant
(Townsville, QLD)

www.stickersuperstore.com.au (for your sticker and sign needs)

Smitten 03 with a hair dryer - slammed and stretched (stealth mode engaged)
Reply
#13
(09-01-2010, 03:00pm)Macbusa Wrote: Ray, you might have missed my question about estimated time of arrival, due to a unintellectual, nil value 'Pazzo rip off' post.

Surely my post wasnt that shocking/distracting!

They look very similar, so much so that I said they are a copy and stand by it.

If you want to pretend they are not a rip off thats fine, I don't want to hijack the thread. Other times on other forums when people have advertised copy levers (I have only seen ASV copies) they clearly state they are copies, which I suppose makes it sit a little better with me.
All the best.
Reply
#14
(08-01-2010, 05:32pm)kawasuki Wrote:
(08-01-2010, 11:41am)Macbusa Wrote: excuse my ignorance, but what is the difference from along to short set? (excluding the obvious length difference Lol3 )

The feel .
(08-01-2010, 10:40am)Madmax Wrote:
(07-01-2010, 09:41pm)kawasuki Wrote: They come in blk Blue ,red gold and silver
They are called Leevaz, thye are billet alloy.
Thye have not the Gen 2 as yet.

Are they doing them for Brembo mastercylinders?

checking
(07-01-2010, 07:41pm)CJ03 Wrote: They look the goods Kawasuki.....what breed are they?

Leevaz is the product name imported by ERI.

Any new's re one's to fit Brembo M/cylinder's yet ?


If Wisdom Comes with Age , I'm one of the Smartest Blokes Here
Reply
#15
(09-01-2010, 10:08pm)Greeny_SA Wrote:
(08-01-2010, 05:32pm)kawasuki Wrote:
(08-01-2010, 11:41am)Macbusa Wrote: excuse my ignorance, but what is the difference from along to short set? (excluding the obvious length difference Lol3 )

The feel .
(08-01-2010, 10:40am)Madmax Wrote:
(07-01-2010, 09:41pm)kawasuki Wrote: They come in blk Blue ,red gold and silver
They are called Leevaz, thye are billet alloy.
Thye have not the Gen 2 as yet.

Are they doing them for Brembo mastercylinders?

checking
(07-01-2010, 07:41pm)CJ03 Wrote: They look the goods Kawasuki.....what breed are they?

Leevaz is the product name imported by ERI.

Any new's re one's to fit Brembo M/cylinder's yet ?

Not as yet Greeny
(09-01-2010, 08:28pm)drworm Wrote:
(09-01-2010, 03:00pm)Macbusa Wrote: Ray, you might have missed my question about estimated time of arrival, due to a unintellectual, nil value 'Pazzo rip off' post.

Surely my post wasnt that shocking/distracting!

They look very similar, so much so that I said they are a copy and stand by it.

If you want to pretend they are not a rip off thats fine, I don't want to hijack the thread. Other times on other forums when people have advertised copy levers (I have only seen ASV copies) they clearly state they are copies, which I suppose makes it sit a little better with me.
All the best.

I am not a 100% but they may be from the same factory, as may be CRG etc. I think most leavers are identical or very similar,u just have to look around to see that,, eg. the pazzo leavers for brembo cyclinders are identical to the original brembo leavers. But isn,t nice to pay 150 instead of 300 for the same gear.
Reply




Users browsing this thread: 4 Guest(s)