clip ons

[pete]

is there any problems in fitting clip ons directly
under the top triple tree, with the forks
in the stock position, was wondering if there would
be any clearance issues, i want to lean over the tank more
its getting hard to keep the front end down lol

tia

[big kev]

Only issue I can think of would be the bars being lower is the might touch the inner fairng panels , that's my thoughts

[pete]

Only issue I can think of would be the bars being lower is the might touch the inner fairng panels , that's my thoughts

thats what i was thinking of too kev.
theres not to much room to play with there.

[Fester]

Hi

No, there are not many probleme.
I have lower my front forks 3.5 cm .
and then placet clipon.

see photos

[pete]

Hi

No, there are not many probleme.
I have lower my front forks 3.5 cm .
and then placet clipon.

see photos

hi fester,
i didnt want to lower the forks atm,
and wanted to fit the clip ons underneath the triple tree
and not above it, tho i like the look of what uve done.

[Fester]

Hi

Normally there is no place because the height of the faring.
You will find it difficult to place your brake and clutch, without the inside of the faring touching.