Dash / Clocks prices ?

[Tony Nitrous]

Just thinking out loud and doing some reseach for a project.
Im not really up to speed on spares prices but im sure some
on here would be.

Gen1 Clock's / Dash.

Not fussed about K's and dont need to be the early
"unrestricted" type either. Just a useable working set ?

2 Questions:

What should I expect to pay ?

Is there any difference between 01 to 07 models clocks ?

Greatful for any info.
Thanks.

Tony.

[Greeny_SA]

Just thinking out loud and doing some reseach for a project.
Im not really up to speed on spares prices but im sure some
on here would be.

Gen1 Clock's / Dash.

Not fussed about K's and dont need to be the early
"unrestricted" type either. Just a useable working set ?

2 Questions:

What should I expect to pay ?

Is there any difference between 01 to 07 models clocks ?

Greatful for any info.
Thanks.

Tony.

As a guide there are 6 or so on eBay USA, $120 to $250 Plus post .

[Maj]

Tony i have a 02 here and access to a 99 , both from conversions to gen 2 , i think mine is ~30k on the clocks ,

[Tony Nitrous]

I hadnt looked at US or UK Ebay as I wanted something with predominantly
Kph markings not with Mph as the main feature.

Thanks Maj, what do you consider the 02 clocks to be worth and
what sort of condition are they in ?

Im hoping that unlike ECU's and subframe's, that all Gen1 clocks are
internaly the same? and only differ in the early unrestricted faces ?

---

I've had them off in the past but cant remember.....

All Busa clocks hard wired with a short lead ?

or does the lead plug into the clocks ?

I have a loom but no plug or fittings.
I can wire a plug on but dont currently have one here.

[Maj]

I have a plug too, first attempt at running the gen2 ecu was with the 02 dash, spliced it in but it read the fault codes wrong and temp was not accurate so i brought a gen 2 dash and respliced in the right connector
will PM