engine mounts torque and sequence

[pete]

ive tried searching without luck,
was wondering if there is a sequence
for tightening the engine mount bolts and
the torque settings for those bolts?

tia

[Batfink]

I posted a complete set of the Service manual for a gen 1 in Tech Discussions... look at Section 3-13
Shows no sequence for tightening engine mount thrust adjusters but gives 10N-m or 1.0 kgf-m or 7.0 lb-ft
lock nut is 45 N-m, 4.5 kgf-m or 32.5 lb-ft

hope this helps

[pete]

yep, thanx tony.