anyone put a 200sx gt28 turbo on hayabusa

[ashnery]

most of the repuatiable turbo builders use a gt 2860 .64a/f .
the nissian 200sx if very similar only .60a/f ,i was thinks of making my own turbo package up ,just wanted to no .I have made turbo kits in the past and geting the write turbo is the key.I was hopeing to use a very common turbo because they are cheap like $400 second hand ,as for the fuel pump regulator and bov you can buy that stuff anywhere.
has anyone done there own i figure i could do it for like $1500 and 500 for a powercomander
any ideas???

[Geri]

That unit would work well for mid-high 200's with fast spool-time. It's almost identical to the turbo I used except for mine was the ballbearing "r" model. Expect around 225-235hp at 6psi boost for non-intercooled.

[Maj]

The right turbo's don't come up that often cheap, lots of .48 ar smaller turbo's and lots with the ceramic turbine , but if you can get a gt28 62 trim (48mm across the face of the compressor wheel) they do well.

[Dan85]

There have been a few gt35-40r's coming off some xr6 turbo's reecntly:lol:

[mechanx]

give dynamic turbo's in brisbane a call . you could also use a turbo of a wrx . I have about 5 2ndhand ones at my shop . give me acall 0732051994 . mechanx

[Maj]

Dan they would work fine for race application.

Mechanx which model wrx turbo's,the smaller ones or the vf34 /35/23

[maggot]

give dynamic turbo's in brisbane a call . you could also use a turbo of a wrx . I have about 5 2ndhand ones at my shop . give me acall 0732051994 . mechanx

Oi Mechanix check Ya PM's. I need to talk to you bout one of those turbo's