750 swingarm mod

[busken]

does anyone have any info about fitting 750/1000 swingarm to hayabusa

[Maj]

They don't fit very well, the shock hole is smaller, you can fit it with the 750 link but never at full height and it will rub the shock
better off cutting the slot further on the busa arm and shortening the adjusting block

[jessie928]

They don't fit very well, the shock hole is smaller, you can fit it with the 750 link but never at full height and it will rub the shock
better off cutting the slot further on the busa arm and shortening the adjusting block

yeah i chopped the slot and spun the blocks around, it does not leave much clearance for the wheel between the swingarm up front :)

makes a big arse differenece with a 44 rear and shortened wheelbase though

JEs

[busken]

thankx jessie i will try that how many links out of chain how much chopped from slot

[commando]

what kind of benifits is there in shortening rear? other than wheel-stands?

[kawasuki]

and maybe a hi - side

[Gnarbunkle99]

Yeah why do it?

[busken]

the reason to make bike a bit more flickable and wheelies

[jessie928]

when you decrease the wheelbase, you will find it turns/flicks much much better.

the downside is it wheelies alot easier :)

i took out about 15mm from the arm and then put on a bigger sprocket and new chain aswell :)

Jes