Contact Us
23-12-2007, 06:08pm
Finally got the turbo finished.
Couple of people to thank before the ride report.
All the guys on the board that have chipped in with answers to my posts thanks guys
Pete (Pete's Pitstop) for the final fine tuning, it was a bit of mucking around to get it done with a few headaches along the way.
Thanks for the extra time and effort
Last but not least Greg without his input and advice and answers to my never ending questions this build wouldn't have happened.
Thanks heaps
Had the first ride today.
Below 5500rpm just like a standard Busa.
Above 5500rpm boost comes in and
FAAAAAAAAAAAAARK
it was worth the hassle.
I stuffed up on cutting for the dump pipe,wrong angle when I marked it now has a hole thats too big.
Some plastic welding will fix it.
Good excuse for new paint in winter.
Couple of people to thank before the ride report.
All the guys on the board that have chipped in with answers to my posts thanks guys
Pete (Pete's Pitstop) for the final fine tuning, it was a bit of mucking around to get it done with a few headaches along the way.
Thanks for the extra time and effort
Last but not least Greg without his input and advice and answers to my never ending questions this build wouldn't have happened.
Thanks heaps
Had the first ride today.
Below 5500rpm just like a standard Busa.
Above 5500rpm boost comes in and
FAAAAAAAAAAAAARK
it was worth the hassle.I stuffed up on cutting for the dump pipe,wrong angle when I marked it now has a hole thats too big.
Some plastic welding will fix it.
Good excuse for new paint in winter.
![[Image: photo3.jpg]](http://s88.photobucket.com/user/loafie01/media/photo3.jpg.html)
![[Image: b76e01eb-552d-45d5-97df-028004b674c3_zps59f1c171.jpg]](http://s120.photobucket.com/user/TheShredder3/media/b76e01eb-552d-45d5-97df-028004b674c3_zps59f1c171.jpg.html)
